GPM-300ST square pipe/pipe beveling machine
A beveling machine that can process pipe and square pipe, and can complete two kinds of pipe beveling without replacing accessories. Processing pipe diameter: 80~300mm
GPM-300ST Pipe/square pipe beveling machine Product Introduction:
This model is designed for pipe and square pipe groove, seamless switching in the process of processing pipe and square pipe groove, no need to buy accessories, one machine to reduce the procurement cost. High beveling efficiency, beveling surface finish Ra3.2~6.3. The product is mainly used in the prefabrication groove process of the pipeline processing workshop. The operation is simple, safe, and one worker can easily operate.
GPM-300ST square pipe/pipe bevel machine Main technical parameters:
Power supply: AC380V 50HZ
Air source: 0.5Mpa
Total power: 5000W
Machining wall thickness: 5~20mm
Processing square tube range: 80*80~300*300mm
Cylindrical tube diameter range: φ80~300mm
Processing rectangular pipe range: long side L to short side ratio <1.5
Groove Angle: 30 degrees, 37.5 degrees, 45 degrees optional
Cutter diameter: 100mm
Net weight: 1300kg
GPM-300ST square pipe beveling machine/Pipe beveling machine Features:
The copyright belongs to MacNefik Machinery Manufacturing (Kunshan) Co., LTD., please indicate the source of the transfer!
Simple operation: no need for G code programming, ordinary workers can easily operate;
HMI: The cutting system developed by GIRET according to the experience of milling equipment research and development, the visual interface is simpler than mobile phone operation;
Layer cutting: The system automatically layers cutting according to the depth of the machining groove, without interference;
One-click start: input data, put the workpiece, one-click start batch processing;
One machine multi-purpose: one machine can process bar material, round pipe, square pipe, square steel groove
Fast processing speed: The milling method is used to process the groove, which is stronger than the traditional turning ability
High surface roughness of groove: Ra3.2~6.3
No auxiliary accessories: the end of the square pipe groove, you can immediately process the round pipe groove, no need to replace the accessories.
